SSAdNDP怎么使用 必须得vasp4.6吗

来源:计算模拟  › 第一性原理  › 正序浏览
  • 回答数

    10

  • 浏览数

    5838

  • 收藏数

    0

作者:戎马书生 发表于 2018-10-24 14:29:44
跳转到指定楼层
我用的5.4.1版本vasp打了补丁能算NBO,但是NBO用的projection输出的文件,SSAdNDP似乎不能用,总是报错,SSAdNDP里的补丁文件是vasp.4.6版本的完全不能用,手动都没法打补丁。我感觉软件编译没问题,是必须用打过补丁的vasp.4.6才能算SSAdNDP吗?

分享:
回复

使用道具

该用户从未签到

新手上路

Rank: 1

积分
46
极客币
109
主题
13
帖子
51
注册时间
2018-10-19
在线时间
3 小时
性别
保密
 楼主| 发表于 2018-10-24 14:33:59 | 显示全部楼层
戎马书生 发表于 2018-10-24 14:33
.SUFFIXES: .inc .f .f90 .F
#---------------------------------------------------------------------- ...

# options for linking (for compiler version 6.X, 7.1) nothing is required
LINK    =
# compiler version 7.0 generates some vector statments which are located
# in the svml library, add the LIBPATH and the library (just in case)
#LINK    =  -L/opt/intel/compiler70/ia32/lib/ -lsvml

#-----------------------------------------------------------------------
# fft libraries:
# VASP.4.6 can use fftw.3.0.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D   = fft3dfurth.o fft3dlib.o
#FFT3D   = fftw3d.o fft3dlib.o   /opt/libs/fftw-3.0.1/lib/libfftw3.a


#=======================================================================
# MPI section, uncomment the following lines
#
# one comment for users of mpich or lam:
# You must *not* compile mpi with g77/f77, because f77/g77            
# appends *two* underscores to symbols that contain already an        
# underscore (i.e. MPI_SEND becomes mpi_send__).  The pgf90/ifc
# compilers however append only one underscore.
# Precompiled mpi version will also not work !!!
#
# We found that mpich.1.2.1 and lam-6.5.X to lam-7.0.4 are stable
# mpich.1.2.1 was configured with
#  ./configure -prefix=/usr/local/mpich_nodvdbg -fc="pgf77 -Mx,119,0x200000"  \
# -f90="pgf90 " \
# --without-romio --without-mpe -opt=-O \
#
# lam was configured with the line
#  ./configure  -prefix /opt/libs/lam-7.0.4 --with-cflags=-O -with-fc=ifc \
# --with-f77flags=-O --without-romio
#
# please note that you might be able to use a lam or mpich version
# compiled with f77/g77, but then you need to add the following
# options: -Msecond_underscore (compilation) and -g77libs (linking)
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi: if you use LAM and compiled it with the options
# suggested above,  you can use the following line
#-----------------------------------------------------------------------

FC=mpif90
FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf               charge density   reduced in Z direction
# wNGZhalf              gamma point only reduced in Z direction
# scaLAPACK             use scaLAPACK (usually slower on 100 Mbit Net)
#-----------------------------------------------------------------------

#CPP    = $(CPP_) -DMPI  -DHOST=\"LinuxIFC\" -DIFC \
#     -Dkind8 -DNGZhalf -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc \
#     -DMPI_BLOCK=intel64  \
##    -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply uncomment the line SCA
#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/
#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a  \
# $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA= -lmkl_scalapack_lp64 -lmkl_blacs_openmpi_lp64

#-----------------------------------------------------------------------
# libraries for mpi
#-----------------------------------------------------------------------

LIB     = -L../vasp.4.lib -ldmy  \
       ../vasp.4.lib/linpack_double.o $(LAPACK) \
       $(SCA) $(BLAS)

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
FFT3D   = fftmpi.o fftmpi_map.o fft3dlib.o

# fftw.3.0.1 is slighly faster and should be used if available
#FFT3D   = fftmpiw.o fftmpi_map.o fft3dlib.o   /opt/libs/fftw-3.0.1/lib/libfftw3.a

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC=   symmetry.o symlib.o   lattlib.o  random.o   

SOURCE=  base.o     mpi.o      smart_allocate.o      xml.o  \
         constant.o jacobi.o   main_mpi.o  scala.o   \
         asa.o      lattice.o  poscar.o   ini.o      setex.o     radial.o  \
         pseudo.o   mgrid.o    mkpoints.o wave.o      wave_mpi.o  $(BASIC) \
         nonl.o     nonlr.o    dfast.o    choleski2.o    \
         mix.o      charge.o   xcgrad.o   xcspin.o    potex1.o   potex2.o  \
         metagga.o  constrmag.o pot.o      cl_shift.o force.o    dos.o      elf.o      \
         tet.o      hamil.o    steep.o    \
         chain.o    dyna.o     relativistic.o LDApU.o sphpro.o  paw.o   us.o \
         ebs.o      wavpre.o   wavpre_noio.o broyden.o \
         dynbr.o    rmm-diis.o reader.o   writer.o   tutor.o xml_writer.o \
         brent.o    stufak.o   fileio.o   opergrid.o stepver.o  \
         dipol.o    xclib.o    chgloc.o   subrot.o   optreal.o   davidson.o \
         edtest.o   electron.o shm.o      pardens.o  paircorrection.o \
         optics.o   constr_cell_relax.o   stm.o    finite_diff.o \
         elpol.o    setlocalpp.o

INC=

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
        rm -f vasp
        $(FCL) -o vasp $(LINK) main.o  $(SOURCE)   $(FFT3D) $(LIB)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
        $(FCL) -o makeparam  $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
        $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
        $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
        $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
        $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:        
        -rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
poscar.o: poscar.inc poscar.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.inc wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
        $(CPP)
        $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
        $(CPP)
        $(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
        $(CPP)
$(SUFFIX).o:
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------
# these special rules are cummulative (that is once failed
#   in one compiler version, stays in the list forever)
# -tpp5|6|7 P, PII-PIII, PIV
# -xW use SIMD (does not pay of on PII, since fft3d uses double prec)
# all other options do no affect the code performance since -O1 is used
#-----------------------------------------------------------------------

fft3dlib.o : fft3dlib.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -tpp7 -xW -prefetch- -unroll0 -e95 -vec_report3 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

radial.o : radial.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symlib.o : symlib.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symmetry.o : symmetry.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

dynbr.o : dynbr.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

broyden.o : broyden.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

us.o : us.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave.o : wave.F
        $(CPP)
        $(FC) -FR -lowercase -O0 -c $*$(SUFFIX)

LDApU.o : LDApU.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
46
极客币
109
主题
13
帖子
51
注册时间
2018-10-19
在线时间
3 小时
性别
保密
 楼主| 发表于 2018-10-24 14:33:40 | 显示全部楼层
滴墨成殇 发表于 2018-10-24 14:32
集群,单机,有没有root权限都没有关系,都可以安。只不过高版本的inel编译器需要对makefile做一点小的改 ...

.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for P4 systems
#
# The makefile was tested only under Linux on Intel platforms
# (Suse 5.3- Suse 9.0)
# the followin compiler versions have been tested
# 5.0, 6.0, 7.0 and 7.1 (some 8.0 versions seem to fail compiling the code)
# presently we recommend version 7.1 or 7.0, since these
# releases have been used to compile the present code versions
#
# it might be required to change some of library pathes, since
# LINUX installation vary a lot
# Hence check ***ALL**** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
#   retrieve the lapackage from ftp.netlib.org
#   and compile the blas routines (BLAS/SRC directory)
#   please use g77 or f77 for the compilation. When I tried to
#   use pgf77 or pgf90 for BLAS, VASP hang up when calling
#   ZHEEV  (however this was with lapack 1.1 now I use lapack 2.0)
# 2) most desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 3a) Intels own optimised BLAS (PIII, P4, Itanium)
#     http://developer.intel.com/software/products/mkl/
#   this is really excellent when you use Intel CPU's
#
# 3b) or obtain the atlas based BLAS routines
#     http://math-atlas.sourceforge.net/
#   you certainly need atlas on the Athlon, since the  mkl
#   routines are not optimal on the Athlon.
#   If you want to use atlas based BLAS, check the lines around LIB=
#
# 3c) mindblowing fast SSE2 (4 GFlops on P4, 2.53 GHz)
#   Kazushige Goto's BLAS
#   http://www.cs.utexas.edu/users/kgoto/signup_first.html
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
#  CPP_   =  /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
#  CPP_   =  /udata/zxhu/opt/intel/composer_xe_2011_sp1.6.233/bin
#
#  SUSE X.X, maybe some Red Hat distributions:

CPP_ =  ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf             charge density   reduced in X direction
# wNGXhalf            gamma point only reduced in X direction
# avoidalloc          avoid ALLOCATE if possible
# IFC                 work around some IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
#-----------------------------------------------------------------------

#CPP     = $(CPP_)  -DHOST=\"LinuxIFC\" \
#         -Dkind8 -DNGXhalf -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc \
#         -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags  (there must a trailing blank on this line)
#-----------------------------------------------------------------------

FFLAGS =  -names lowercase -assume byterecl -heap-arrays 64

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK  SSE1 optimization,  but also generate code executable on all mach.
#       xK improves performance somewhat on XP, and a is required in order
#       to run the code on older Athlons as well
# -xW   SSE2 optimization
# -axW  SSE2 optimization,  but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

OFLAG=-O3 -xW -tpp7

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =

OBJ_NOOPT =
DEBUG  = -FR -O0
INLINE = $(OFLAG)


#-----------------------------------------------------------------------
# the following lines specify the position of BLAS  and LAPACK
# on P4, VASP works fastest with the libgoto library
# so that's what I recommend
#-----------------------------------------------------------------------

# Atlas based libraries
#ATLASHOME= /udata/zxhu/opt/Linux_P4SSE2/lib
#BLAS=   -L$(ATLASHOME)  -lf77blas -latlas

# use specific libraries (default library path might point to other libraries)
#BLAS= $(ATLASHOME)/libf77blas.a $(ATLASHOME)/libatlas.a

# use the mkl Intel libraries for p4 (www.intel.com)
# mkl.5.1
# set -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines
BLAS= -L/udata/zxhu/opt/intel/composer_xe_2011_sp1.6.233/mkl/lib/intel64 -lmkl_intel_lp64  -lpthread -lmkl_core -lmkl_sequential

# mkl.5.2 requires also to -lguide library
# set -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines
#BLAS=-L/opt/intel/mkl/lib/32 -lmkl_p4 -lguide -lpthread

# even faster Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
#BLAS=  /opt/libs/libgoto/libgoto_p4_512-r0.6.so

# LAPACK, simplest use vasp.4.lib/lapack_double
#LAPACK= ../vasp.4.lib/lapack_double.o

# use atlas optimized part of lapack
#LAPACK= ../vasp.4.lib/lapack_atlas.o  -llapack -lcblas

# use the mkl Intel lapack
LAPACK= -L/udata/zxhu/opt/intel/composer_xe_2011_sp1.6.233/mkl/lib/intel64 -lmkl_intel_lp64 -lpthread -lmkl_core -lmkl_sequential

#-----------------------------------------------------------------------

LIB  = -L../vasp.4.lib -ldmy \
     ../vasp.4.lib/linpack_double.o $(LAPACK) \
     $(BLAS)

回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
46
极客币
109
主题
13
帖子
51
注册时间
2018-10-19
在线时间
3 小时
性别
保密
 楼主| 发表于 2018-10-24 14:32:57 | 显示全部楼层
滴墨成殇 发表于 2018-10-24 14:32
集群,单机,有没有root权限都没有关系,都可以安。只不过高版本的inel编译器需要对makefile做一点小的改 ...

编译器我装了2011和2018两个版本,折腾的半天,没搞明白
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
38
极客币
98
主题
13
帖子
41
注册时间
2018-10-19
在线时间
2 小时
性别
保密
发表于 2018-10-24 14:32:38 | 显示全部楼层
戎马书生 发表于 2018-10-24 14:32
我单机编译vasp.4.6遇到各种问题,我是在集群上装的,没有root权限

集群,单机,有没有root权限都没有关系,都可以安。只不过高版本的inel编译器需要对makefile做一点小的改动罢了
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
46
极客币
109
主题
13
帖子
51
注册时间
2018-10-19
在线时间
3 小时
性别
保密
 楼主| 发表于 2018-10-24 14:32:01 | 显示全部楼层
顾我安稳 发表于 2018-10-24 14:30
我也做过相同的测试,根据patch文件手动补5.4版本,最后还是失败了。最后发现只能在4.6上好使,又不总是用 ...

我单机编译vasp.4.6遇到各种问题,我是在集群上装的,没有root权限
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
46
极客币
109
主题
13
帖子
51
注册时间
2018-10-19
在线时间
3 小时
性别
保密
 楼主| 发表于 2018-10-24 14:31:44 | 显示全部楼层
心尖上的刺青 发表于 2018-10-24 14:31
你可以用另一个版本:http://schmidt.chem.wisc.edu/nbosoftware
能够支持到VASP5.4

这个只能看到双键吧,这个我试过可以
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
34
极客币
84
主题
9
帖子
36
注册时间
2018-10-19
在线时间
2 小时
性别
保密
发表于 2018-10-24 14:31:12 | 显示全部楼层
你可以用另一个版本:http://schmidt.chem.wisc.edu/nbosoftware
能够支持到VASP5.4
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
34
极客币
84
主题
9
帖子
36
注册时间
2018-10-19
在线时间
2 小时
性别
保密
发表于 2018-10-24 14:30:53 | 显示全部楼层
vasp5的版本有些输出文件的格式变了,很可能会出问题
回复

使用道具 举报

该用户从未签到

新手上路

Rank: 1

积分
34
极客币
84
主题
9
帖子
36
注册时间
2018-10-19
在线时间
2 小时
性别
保密
发表于 2018-10-24 14:30:36 | 显示全部楼层
Please report bugs, any feedback or questions by e-mail: timur.galeev@aggiemail.usu.edu
回复

使用道具 举报

12下一页
高级模式 评论
您需要登录后才可以回帖 登录 | 立即注册 微信登录